To remove coating from plastic glasses, follow these steps: 1. Use a cotton swab to apply etching cream. 2. Let it sit for five minutes. 3. Gently scrub the lenses with another cotton swab. 4. Rinse the lenses with soap and water to ensure a clear finish. Soak the microfiber cloth in the soapy water. … Read more

To remove anti-glare coating from glass lenses, mix 5 parts isopropyl alcohol with 1 part saltwater. Soak the glasses in this solution for one hour. After soaking, use a plastic scraper to gently lift the softened coating. Finally, rinse the lenses thoroughly to remove any residue. If initial attempts are ineffective, consider using a specialized … Read more

To remove lenses from 3D glasses, use a small screwdriver to detach the arms. Carefully take out the lens retainer pieces. If needed, peel away any protective plastic. Handle the lenses gently to avoid damage. This method ensures safe lens removal while maintaining the integrity of the sunglasses. Next, examine the frame. If your 3D … Read more

To reinsert a glass lens that fell out of metal glasses, find the small screw near the lens opening. Use a jeweller’s screwdriver to loosen the screw. Carefully place the lens back into the frame, ensuring it fits into the lens groove. Finally, gently tighten the screw to secure the lens in place. Then, align … Read more

To recolor glasses lenses, mix 1 part liquid dye with 9 parts water (e.g., 100mL dye in 900mL water). Blend the solution well. Let it sit for a few seconds. Dip the lenses into the solution and gently agitate them for even coloration. This process ensures that the lenses achieve the desired hue effectively. Next, … Read more

To apply vinyl on glass lenses, first clean the surface with alcohol. Next, use transfer paper to place the Oracle 651 vinyl correctly. Use the water leveling method to ensure even application. Press down firmly with a scraper to eliminate any air bubbles. Allow at least 48 hours of cure time for a strong bond. … Read more

To put lenses in glasses with a fish line frame, first, remove the old nylon line using a small tool. Thread the new line through the holes near the nose pads. Place the lens securely in the groove. Finally, use a safety pin to pull the line tight, ensuring the lens is held firmly in … Read more

To put lenses back in a glasses frame, follow these steps: 1. Find the small screw where the lens came out. 2. Use a jeweller’s screwdriver to loosen the screw. 3. Align the lens with the frame’s groove. 4. Hold the lens in place and tighten the screw for a secure fit. Your glasses will … Read more

To put candle soot on glasses lenses, first light a candle. Hold a metal spoon over the flame to collect black soot. Then, use a lens cloth to transfer the soot to the lenses. Wipe away any fingerprints. Finally, ensure the lenses are clean and free from dust before applying the soot. If the soot … Read more

To push a lens back into a glasses frame, first check if heat application is needed for the materials. If not, align the lens with the groove in the frame. Use the pressing technique by applying gentle pressure with your thumbs on the top and bottom. Listen for a clicking sound to confirm proper alignment … Read more